Phone: 07 3391 5999
Fax: 07 3391 5899
ABN: 47 010 928 480
14 Wellington Road,
Woolloongabba QLD 4102
(Cnr Nile Street)
See the Contact Us page
for further information
Why we use and
Australian Made Steel
Scan QR Code for
Share this page:
Adjustable Tops, shown below, to suit a variety of Steel House Columns, Stumps, Posts and Mullions in a multitude of assorted sizes are manufactured by Scott Metals at our Woolloongabba, Brisbane factory. Pricing below.
There are 2 different types, (Type 1 and Type 2), of Adjustable Tops available which are more commonly used with 75x75 Columns. When the finished Column needs to be Fully Hot Dip Galvanised, Type 2 Adjustable Tops must be used.
Type-1 This form of Adjustable Top is fabricated using a Swaged Nut connected to a 75mm Square 8mm thick plate and 30mm Threaded Rod. The Standard Plate, Swaged Nut and Threaded Bar are Galvanised. The Type 1 Adjustable Top is Engineer certified to a Vertical Load capacity of 38.0 KN. These Tops are suitable for use in W33, W41 and W50 categories. Pricing and Picture below.
Type - 2
These Adjustable Tops are manufactured using 75x75x5mm Duragal-Plus RHS to its Base,
a 250mm long 30mm Galvanised Threaded Rod complete with Galvanised Nuts is then
fully welded to any Top Plate. Pricing and Picture.
Use Type 2 Adjustable Tops when Columns are to be Hot Dip Galvanised.
Top Plate configuration that is generally used with the Type 1 Adjustable Top is the STD, shown below. For 75x75 Columns the plate used is 75mm wide and 8mm thick, is 250mm long with 2 @ Slotted holes 40mm x 18mm set centrally 35mm in from each end. Other top plate styles from Corner, Half, 4 Way, Tee and Vertical are also fabricated to order. Type 2 Top Plate is 75mm wide and 8mm thick, is 200mm long with 2 @ 14mm holes set centrally 25mm in from each end. For more information on top plate styles see the House Column page.
The Bottom Plate of the Type 1 and the RHS Base of the Type 2 Adjustable Post Tops are fully welded to the top end of the 75x75 Column with a minimum 6mm continuous weld, ensuring strength and structural integrity.
Price is for the Adjustable Top Only with a STD Top Plate configuration for 75x75 Columns. For non standard tops, alternative RHS size and any other special requirements, please contact us for an exact costing.
Delivery: Adjustable Column Tops delivered Door
to Door Australia Wide: Adelaide, Brisbane, Canberra, Darwin, Hobart, Perth, Melbourne,
Sydney and Regional & Country
Areas or Collect from our Brisbane Depot.
Contact Us for Delivery Prices and lead times.
Adjustable Column Tops are manufactured in our Brisbane based factory.