Scott Metals

"Australian Family Owned Since 1967"

TYPE 1

Standard
Inground Style

Galvanised Pipe
1600mm High
Complete with
Galv Top Cap

Protection Bollards: At Scott Metals our Steel Security Bollards are manufactured from Trade Quality Heavy Duty Structural Grade Hot Dip Galvanised Steel Pipe ensuring strength and structural integrity.

BUDGET LIGHT GRADE BOLLARDS ALSO AVAILABLE. See Below.

Type 1 Bollards consist of the Hot Dip Galvanised Pipe cut to length (1600mm) and come complete with a Galvanised Metal Cap.

Type 2 Bollards consist of the Hot Dip Galvanised Pipe cut to length (1100mm) and capped with a Galvanised Metal Cap. A 250mm square 10mm thick base plate is fully welded to the pipe with a minimum 6mm continuous fillet weld, ensuring strength and structural integrity. After fabrication the plate and weld area are painted with a Cold Galvanised primer to assist with rust prevention. (Round Base Plates are also available however extra fabrication time is required).

Should you require extra protection from the elements, then we recommend using Fully Hot Dip Galvanised option for Type 2 Bollards. Hot Dip Galvanising is a process where the bollard, after manufacture, is completely immersed in molten zinc. This thick metallic zinc coating, that completely covers the bollard and base plate, inside and out, provides a superior corrosion resistant finish.

Lead Times: The majority of our Type 1 and Type 2 Standard Protection Bollards are fabricated to order within 24 hours. For the Fully Hot Dip Galvanised Bollards please allow up to 10 working days for manufacture and surface application.

Alternative Designs: Round, Square and Rectangular steel sections in various sizes, lengths, thicknesses and finishes, are used in the production of Steel Security Bollards. Different top and base plate configurations as well as side eyelets for chain attachment or any other special features that may be required can be manufactured to order.

Delivery: Security Bollards delivered Door to Door Australia Wide.
Contact Us for Delivery Prices and lead times for all your Steel Security Bollard Supplies in: Adelaide, Brisbane, Canberra, Darwin, Hobart, Perth, Melbourne, Sydney and Regional & Country Areas or Collection is available from our Brisbane Depot.

Scott Metals your Security Bollard Suppliers, Australia Wide.

These protection bollards, also known as security bollards, parking bollards, carpark bollards, traffic bollards, safety bollards, ram raid posts and barrier posts, are manufactured to Trade Quality Standards in our Brisbane factory from Australian Made Steel.

All to your requirements - ON TIME, EVERY TIME.

Light Grade Steel Security Bollards

Powder Coated Yellow
900mm high 75mm diameter Bollard
Ready to install with a Capped Top
Refective Red Band to the upper Bollard
Base Plate with 4 @ M12 holes for anchor bolts

$69.00 each (Includes GST)

Robust Rubber Corner Mouldings

800mm High Corner Protector
Impact protection for vehicles and building structures
Four mounting holes to atach to structure
For commercial and residential garages and car parks
Made from recycled black rubber

$13.25 each (Includes GST)