Scott Metals
Meeting the Challenge

Search our Site

Phone: 3391 5999
Facsimile: 3391 5899

14 Wellington Road
WOOLLOONGABBA
(Cnr Nile Street)
UBD Map 23 - G18


Roofing and Guttering

All steel Roofing Profiles are available custom cut to length to minimize and avoid wastage. Australian Made BlueScope Steel is used in the manufacture of our roofing products. All Profiles and Guttering are manufactured in either ZINCALUME or COLORBOND finish.
Some Profiles and Quad Guttering are also available in Galvabond.

ALL PRICES ON THIS PAGE UPDATED DAILY AND INCLUDE GST
Roofing supplied under 1200mm long incurs a $1.10 P/Sht shearing fee
Corrugated Roofing
Traditional Corrugated Roofing for a minimum roof pitch of 5 degrees. Available curved for architectural or bullnosing applications.
Thickness
Zinc/Metre
Galv/Metre
Colorbond/Metre
0.42 BMT
$13.00
$19.40
$14.50
0.6 BMT (Curvable)
$27.15
N/A
$27.50
Curving of Corrugated Roofing:
$16.50 P/Sheet up to 3000 and $30.00 P/Sheet for lengths over 3000
Maximum Supporting Spacings    

Roof
Single Span
700
End Span
900
Internal Span
1200
Overhang
200


Wall

Single Span
1800
End Span
2500
Internal Span
2700
Overhang
200
DEK Roofing
Modern looking product suitable for roofing and walling. Deep ribs allows for 2 degree minimum roof pitch and has excellent water carrying capabilities.
Thickness
Zinc/Metre
Galv/Metre
Colorbond/Metre
0.42 BMT
$13.00
$19.40
$14.50
Maximum Supporting Spacings

Roof
Single Span
1100
End Span
1300
Internal Span
1900
Overhang
150

Wall
Single Span
2400
End Span
3000
Internal Span
3000
Overhang
150
Span Roofing    
Anti capillary side laps and deep ribs gives this product improved water carrying performance and allows for a 3 degree roof pitch.
Thickness
Zincalume/Metre
Colorbond/Metre
0.42 BMT
$18.15
$18.90
Maximum Supporting Spacings

Roof
Single Span
1300
End Span
1800
Internal Span
2400
Overhang
300

Wall
Single Span
2500
End Span
3000
Internal Span
3300
Overhang
300
Kliplok Roofing
Interlock ribs with concealed fastening (no puncturing) allowing for exceptional weather resistance on roof pitches as low as 1 degree.
Thickness
Zincalume/Metre
Colorbond/Metre
0.42 BMT
$19.55
$23.25
Fixing Clips in Boxes of 50 = $110.00
Maximum Supporting Spacings

Roof
Single Span
1600
End Span
1700
Internal Span
2100
Overhang
150

Wall
Single Span
2600
End Span
2400
Internal Span
3000
Overhang
150
Mini Corro
Able to be used for both straight and curved applications. NOT suitable for roofing. Common usage is for decorative finishes on walls, soffit linings, ceilings, awnings, screens and feature walls. Can also be used to great effect on furniture, gates, fencing, splash back areas and in shop fitting.
Thickness
Zincalume/Metre
Colorbond/Metre
0.42 BMT
$28.00
$30.00
Mini Corro also incurs a Rolling fee of $27.50 Per Order
Curving of Mini Corro available at $30.00 Per Sheet
Maximum Supporting Spacings    

Wall
Single Span
1200
End Span
1500
Internal Span
1500
Overhang
100
Polycarbonate Roofing
Corrugated profile available in colours:
Clear, Opal, Grey, Light Bronze and Dark Tint see samples
Dek and Span profiles available in colours:
Clear, Opal, Grey and Light Bronze see samples
Profile
$ / Metre
Charged at Nearest Length:
Corrugated/Span
$17.75
1800  2100  2400  2700  3000
3600  4200  4800  5400  6000
Dek
$20.00
Weather-Lock Seals and Screws = $17.50 Per Bag of 50

Polycarbonate is one of the most advanced thermoplastic polymers available, the sheets are manufactured to match the profiles of steel roofing. Polycarbonate sheeting is quick and easy to install, is flexible and virtually unbreakable, giving superb resistance to impact from hailstones, and also has the remarkable UV shielding capacity of 99%.

Polycarbonate sheets are ideal for applications requiring high light transmission. Clear Polycarbonate roof sheeting transmits some 90% of light with heat transmission as high as 85%. Tinted sheets reduce the glare and transmit less heat than clear but have a corresponding loss of light transmission (see table).

Never use silicone sealant other than Seal-Once® or Tremfill® co-polymer sealants which are compatible with Polycarbonate sheeting, the use of incompatible sealants can weaken and damage the sheet.

Special, chemically compatible, weather-lock seals and screws are available for use with Polycarbonate roofing. To allow for expansion of sheets, oversized screw holes (10mm minimum) should be drilled prior to fixing. Polycarbonate roofing comes with a lifetime warranty.

Lightweight, resistant to weathering, self extinguishing, UV shielding, flexible enough to curve, impact resistant, high light transmission and anti-ageing properties, all these characteristics and more make Polycarbonate roof sheeting a product without comparison.

Polycarbonate Light and Heat Transmission
Colour
Light Transmission
Heat
Clear
90%
85%
Opal
60%
55%
Grey
35%
40%
Light Bronze
40%
45%
Dark Tint
25%
30%
Quad Gutter

Low Front:
125, 150 & 175mm

High Front:
150 & 175mm
(With Slotted Front only)

The traditional rounded "D" gutter is a perfect complement to corrugated roofing. This style of gutter is used for both steel and
tiled roofing applications. Available in standard lengths of 4, 6 and 8 metres. A full range of accessories are obtainable to enable a perfect finish. Quad gutter is fabricated in various sizes, the most common of which is the 150 low front.
150mm Low Front Pricing - All other Sizes are P.O.A
Length mm
Zinc/Ea
Galv/Ea
Colorbond/Ea
4000
$40.00$46.00$45.00
6000
$60.00$69.00$67.50
8000
$80.00$92.00$90.00
Accessories
   
150mm Low Front Accessories Pricing - All other Sizes are P.O.A
Product
Zinc/Ea
Galv/Ea
Colorbond/Ea
Internal Bracket
$1.90N/AN/A
Spike Bracket
N/A$3.30P.O.A
Stop End
$3.00$3.45$3.25
Return End
$32.60
$37.50
$35.50
Int/Ext Corner
$30.50$35.10$33.00
Squareline Gutter
Squareline Gutter has a generous water carrying ability and comes with a full range of components enabling a perfect finish. This gutter complements the Squareline Fascia Board system and comes in standard lengths of 4, 6 and 8 metres. Squareline Gutter is used extensively with Dek and Tiled roofing.
Length mm
Zincalume/Ea
Colorbond/Ea
4000
$40.00$45.00
6000
$60.00$67.50
8000
$80.00$90.00
Accessories
   
Product
Zincalume/Ea
Colorbond/Ea
Internal Bracket
$1.90N/A
Stop End
$2.20$2.40
Int/Ext Corner
$30.50$33.00
 
Zincalume    
A Zinc / Aluminium coating imparting a corrosion resistance of up to four times the life of galvanized steel.
Colorbond

Is a Zinc / Aluminium steel sheet with an oven baked paint coating, providing a superior corrosion resistance for a long life. Available in
20 colours with an improved protection coating, it has a 25 year warranty against perforation by weathering.

 Colorbond Colours

(Colorbond and colour names are trademarks of BlueScope Steel Limited)
(Colours Shown are indicative only and not a true representation)


Not all items necessarily stocked at all times.
View our Pricing Policy.

  Delivery Info