Scott Metals
Roofing and Guttering
Phone: 07 3391 5999
Fax: 07 3391 5899
ABN: 47 010 928 480
14 Wellington Road,
Woolloongabba QLD 4102
(Cnr Nile Street)
See the Contact Us page for information and maps.
Why we use and recommend quality Australian Made Steel.
5th February 2012
Share this page:
Important Announcement - Christmas Closure Times
This is just simply a test. Pay no attention!
This is just simply a test. Pay no attention!
This is just simply a test. Pay no attention!
| Roofing and Guttering | |||
| All steel Roofing Profiles are available custom cut to length to minimize and
avoid wastage. Australian Made BlueScope Steel is used in the manufacture of our
roofing products. All Profiles and Guttering are manufactured in either ZINCALUME or COLORBOND finish. Some Profiles and Quad Guttering are also available in Galvabond. COLORBOND COLOUR CHART shown below. |
|||
| Associated Products: Battens, Capping, Downpipes, Flashing, Insulation, Screws etc are located on the Roofing Accessories Page. Metal C and Z Purlins and accessories are located on the Purlin Page. |
|||
| All Prices Updated Daily and INCLUDE GST | |||
| Roofing supplied under 1200mm long incurs a $1.10 P/Sht shearing fee | |||
| Corrugated Steel Roofing | |||
 |
|||
| Traditional Corrugated Roofing for a minimum roof pitch
of 5 degrees. Available curved for architectural or bullnosing applications. |
|||
| Thickness | Zinc/L-Mtr | Galv/L-Mtr | Colorbond/L-Mtr |
| 0.42 BMT | $13.00 | $19.40 | $14.50 |
| 0.6 BMT (Curvable) | $27.15 | N/A | $27.50 |
| Curving of Corrugated Roofing: $16.50 P/Sheet up to 3000 and $30.00 P/Sheet for lengths over 3000 |
|||
| Maximum Supporting Spacings | |||
| Roof | Single Span | 700 | |
| End Span | 900 | ||
| Internal Span | 1200 | ||
| Overhang | 200 | ||
| Wall | Single Span | 1800 | |
| End Span | 2500 | ||
| Internal Span | 2700 | ||
| Overhang | 200 | ||
 |
|||
| DEK Roofing | |||
 |
|||
| Modern looking product suitable for roofing and walling applications. The sheet's deep ribs allows for a 2 degree minimum roof pitch giving Dek Roofing excellent water carrying capabilities. | |||
| Thickness | Zinc/L-Mtr | Galv/L-Mtr | Colorbond/L-Mtr |
| 0.42 BMT | $13.00 | $19.40 | $14.50 |
| Maximum Supporting Spacings | |||
| Roof | Single Span | 1100 | |
| End Span | 1300 | ||
| Internal Span | 1900 | ||
| Overhang | 150 | ||
| Wall | Single Span | 2400 | |
| End Span | 3000 | ||
| Internal Span | 3000 | ||
| Overhang | 150 | ||
|
|||
| Span Roofing | |||
 |
|||
| Anti capillary side laps and deep ribs gives this product improved water carrying performance and allows for a 2 degree roof pitch. | |||
| Thickness | Zincalume/L-Mtr | Colorbond/L-Mtr | |
| 0.42 BMT | $18.15 | $18.90 | |
| Maximum Supporting Spacings | |||
| Roof | Single Span | 1300 | |
| End Span | 1800 | ||
| Internal Span | 2400 | ||
| Overhang | 300 | ||
| Wall | Single Span | 2500 | |
| End Span | 3000 | ||
| Internal Span | 3300 | ||
| Overhang | 300 | ||
|
|||
| Kliplok Roofing | |||
 |
|||
| Interlock ribs with concealed fastening (no puncturing)
allowing for exceptional weather resistance on roof pitches as low as 2 degrees. |
|||
| Thickness | Zincalume/L-Mtr | Colorbond/L-Mtr | |
| 0.42 BMT | $19.55 | $23.25 | |
| Fixing Clips in Boxes of 50 = $110.00 | |||
| Maximum Supporting Spacings | |||
| Roof | Single Span | 1600 | |
| End Span | 1700 | ||
| Internal Span | 2100 | ||
| Overhang | 150 | ||
| Wall | Single Span | 2600 | |
| End Span | 2400 | ||
| Internal Span | 3000 | ||
| Overhang | 150 | ||
|
|||
| Mini Corro | |||
 |
|||
| Able to be used for a variety of applications with the corrugations running vertically or horizontally. NOT suitable for roofing. Common usage is for decorative finishes on walls, ceilings, screens, soffit linings, awnings, and feature walls. Also used to great effect on furniture, gates, fencing, splash back areas and in shop fit outs. | |||
| Thickness | Zincalume/L-Mtr | Colorbond/L-Mtr | |
| 0.42 BMT | $28.00 | $30.00 | |
| A Minimum Standard Length charge of 1200mm is applicable Under 1200mm long also incurs a $1.10 per sheet shearing fee |
|||
| Maximum Supporting Spacings | |||
| Wall | Single Span | 1200 | |
| End Span | 1500 | ||
| Internal Span | 1500 | ||
| Overhang | 100 | ||
|
|||
| Polycarbonate Roofing | |||
| Corrugated profile standard colours available: Clear, Opal, Grey, Light Bronze and Dark Tint - see samples |
|||
| Dek profile standard colours available: Clear, Opal, Grey and Light Bronze - see samples |
|||
| Profile | $ / L-Mtr | Charged at Nearest Length: | |
| Corrugated | $17.75 | 1800
2100 2400 2700 3000 3600 4200 4800 5400 6000 |
|
| Dek | $20.00 | ||
| Weather-Lock Seals and Screws = $17.50 Per Bag of 50 | |||
Polycarbonate is one of the most advanced thermoplastic polymers available. The sheets are manufactured to match the profiles of steel roofing. Polycarbonate sheeting is quick and easy to install, is flexible and virtually unbreakable, giving superb resistance to impact from hailstones, and also has the remarkable UV shielding capacity of 99%. Polycarbonate sheets are ideal for applications requiring high light transmission. Clear Polycarbonate roof sheeting transmits some 90% of light with heat transmission as high as 85%. Tinted sheets reduce the glare and transmit less heat than clear but have a corresponding loss of light transmission (see table). Never use any sealant other than a co-polymer sealant which is specifically formulated to be compatible with polycarbonate sheeting. The use of incompatible sealants can weaken and damage the sheet. Special, chemically compatible, weather-lock seals and screws are available for use with Polycarbonate roofing. To allow for expansion of sheets, oversized screw holes (10mm minimum) should be drilled prior to fixing. Polycarbonate roofing comes with a lifetime warranty. Lightweight, resistant to weathering, self extinguishing, UV shielding, flexible enough to curve, impact resistant, high light transmission and anti-ageing properties - all these characteristics and more make Polycarbonate roof sheeting a product without comparison. |
|||
| Polycarbonate Light and Heat Transmission | |||
| Colour | Light Transmission | Heat | |
| Clear | 90% | 85% | |
| Opal | 55% | 40% | |
| Grey | 25% | 50% | |
| Light Bronze | 35% | 60% | |
| Dark Tint | 20% | 40% | |
Other Colours available include: Mist Green, Smooth Cream, Pearl Ice, Silver Mist and Wheat. Additional charges may apply for these colours. |
|||
|
|||
| Quad Gutter | |||
 |
Low Front: High Front: |
||
| The traditional
rounded "D" gutter is a perfect complement to corrugated roofing. This
style of gutter is used for both steel and tiled roofing applications. Available in standard lengths of 4, 6 and 8 metres. A full range of accessories are obtainable to enable a perfect finish. Quad gutter is fabricated in various sizes, the most common of which is the 150 low front. |
|||
| 150mm Low Front Pricing - All other Sizes are P.O.A | |||
| Length mm | Zinc/Ea | Galv/Ea | Colorbond/Ea |
| 4000 | $40.00 | $50.00 | $45.00 |
| 6000 | $60.00 | $75.00 | $67.50 |
| 8000 | $80.00 | $100.00 | $90.00 |
| Accessories | |||
 |
|||
| 150mm Low Front Accessories Pricing - All other Sizes are P.O.A | |||
| Product | Zinc/Ea | Galv/Ea | Colorbond/Ea |
| Internal Bracket | $1.90 | N/A | N/A |
| Spike Bracket | N/A | $3.30 | P.O.A |
| Stop End | $3.00 | $3.75 | $3.25 |
| Return End | $32.60 | $40.75 | $35.50 |
| Int/Ext Corner | $37.50 | $46.90 | $47.50 |
|
|||
| Squareline Gutter | |||
 |
A minimum gutter fall of 1 in 500 is recommended. Some ponding may result without this slope. |
||
| Squareline Gutter has a generous water carrying ability and comes with a full range of components enabling a perfect finish. This gutter complements the Squareline Fascia Board system and comes in standard lengths of 4, 6 and 8 metres. Squareline Gutter is used extensively with Dek and Tiled roofing. | |||
| Length mm | Zincalume/Ea | Colorbond/Ea | |
| 4000 | $40.00 | $45.00 | |
| 6000 | $60.00 | $67.50 | |
| 8000 | $80.00 | $90.00 | |
| Accessories | |||
 |
|||
| Product | Zincalume/Ea | Colorbond/Ea | |
| Internal Bracket | $1.90 | N/A | |
| Stop End | $2.20 | $2.40 | |
| Int/Ext Corner | $49.50 | $65.00 | |
|
|||
| Zincalume | |||
| A Zinc / Aluminium coating imparting a corrosion resistance of up to four times the life of Galvanised steel. | |||
| Colorbond | |||
| A Zinc / Aluminium steel sheet with an oven
baked paint coating, providing a superior corrosion resistance for a long life.
Available in 20 colours with an improved protection coating, and comes with a 25 year warranty against perforation by weathering. |
|||
|
|||
| Metal Roofing Products Colorbond Colours | |||
 (Colorbond and colour names are trademarks of BlueScope
Steel Limited)(Colours shown are indicative only and not a true representation) |
|||
| Delivery: Corrugated, Dek, Mini Corro; All
Roofing and Guttering products can be delivered Door to Door. Contact Us for Delivery Prices and lead times for all your Steel Roofing Supplies in: Adelaide, Brisbane, Canberra, Darwin, Hobart, Perth, Melbourne, Sydney, and all Regional and Country Areas. Scott Metals your Steel Metal Roofing Suppliers, Australia Wide. |
|||
